Engineering Plastics

TECAPEEK CF30 Black

Chemical Designation

PEEK (Polyetheretherketone)

Colour

black

Density

1.38 g/cm3

Fillers

carbon fibres

Main features

  • good heat deflection temperature
  • good chemical resistance
  • inherent flame retardant
  • hydrolysis and superheated steam resistant
  • very high stiffness
  • very high creep resistant
  • high dimensional stability
  • resistance against high energy radiation

Target Industries

  • conveyor technology
  • mechanical engineering
  • textile industry
  • chemical technology
  • automotive industry
  • aircraft and aerospace technology
  • vacuum technology
Mechanical properties parameter value unit norm  

Modulus of elasticity (tensile test)

1mm/min

6800

MPa

DIN EN ISO 527-2

1)

Tensile strength

50mm/min

122

MPa

DIN EN ISO 527-2

Tensile strength at yield

50mm/min

122

MPa

DIN EN ISO 527-2

Elongation at yield

50mm/min

7

%

DIN EN ISO 527-2

Elongation at break

50mm/min

7

%

DIN EN ISO 527-2

Flexural strength

2mm/min, 10 N

193

MPa

DIN EN ISO 178

2)

Modulus of elasticity (flexural test)

2mm/min, 10 N

6800

MPa

DIN EN ISO 178

Compression strength

1% / 2%5mm/min, 10 N

25 / 47

MPa

EN ISO 604

3)

Compression modulus

5mm/min, 10 N

5000

MPa

EN ISO 604

4)

Impact strength (Charpy)

max. 7,5J

62

kJ/m2

DIN EN ISO 179-1eU

5)

Ball indentation hardness

355

MPa

ISO 2039-1

6)

(1) For tensile test: specimen type 1b
(2) For flexural test: support span 64mm, norm specimen.
(3) Specimen 10x10x10mm
(4) Specimen 10x10x50mm, modulus range between 0.5 and 1% compression.
(5) For Charpy test: support span 64mm, norm specimen.
(6) Specimen in 4mm thickness
Thermal properties parameter value unit norm  

Glass transition temperature

147

°C

DIN 53765

1)

Melting temperature

341

°C

DIN 53765

Service temperature

short term

300

°C

2)

Service temperature

long term

260

°C

Thermal expansion (CLTE)

23-60°C, long.

4

10-5 K-1

DIN EN ISO 11359-1;2

Thermal expansion (CLTE)

23-100°C, long.

4

10-5 K-1

DIN EN ISO 11359-1;2

Thermal expansion (CLTE)

100-150°C, long.

6

10-5 K-1

DIN EN ISO 11359-1;2

Specific heat

1,2

J/(g*K)

ISO 22007-4:2008

Thermal conductivity

0,66

W/(K*m)

ISO 22007-4:2008

(1) Found in public sources.
(2) Found in public sources. Individual testing regarding application conditions is mandatory.
Electrical properties parameter value unit norm  

Specific surface resistance

> 108

Ω

DIN EN 61340-2-3

Specific volume resistance

103 - 1011

Ω*cm

DIN EN 61340-2-3

Mechanical properties parameter value unit norm  

Water absorption

24h / 96h (23°C)

0.02 /0.03

%

DIN EN ISO 62

1)

Resistance to hot water/ bases

+

-

2)

Resistance to weathering

-

-

3)

Flammability (UL94)

corresponding to

V0

DIN IEC 60695-11-10;

4)

(1) Ø ca. 50mm, h=13mm
(2) + good resistance
(3) - poor resistance
(4) Corresponding means no listing at UL (yellow card). The information might be taken from resin, stock shape or estimation. Individual testing regarding application conditions is mandatory.

Made exclusively from Victrex® PEEK

Our information and statements reflect the current state of our knowledge and shall inform about our products and their applications. They do not assure or guarantee chemical resistance, quality of products and their merchantability in a legally binding way. Our products are not defined for use in medical or dental implants. Existing commercial patents have to be observed. The corresponding values and information are no minimum or maximum values, but guideline values that can be used primarily for comparison purposes for material selection. These values are within the normal tolerance range of product properties and do not represent guaranteed property values. Therefore they shall not be used for specification purposes. Unless otherwise noted, these values were determined by tests at reference dimensions (typically rods with diameter 40-60 mm according to DIN EN 15860) on extruded and machined specimen. As the properties depend on the dimensions of the semifinished products and the orientation in the component (esp. in reinforced grades), the material may not be used without a separate testing under individual circumstances. The customer is solely responsible for the quality and suitability of products for the application and has to test usage and processing prior to use. Data sheet values are subject to periodic review, the most recent update can be found at www.ensinger-online.com. Technical changes reserved.

Disclaimer

All data provided is for information and guidance only. Information above is not for design purposes and comes without warranty or guarantee with respect to the subject matter or fitness for purpose.