Nitronic

Nitronic 60

Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In Nitronic 60 ,chloride pitting is superior to Type 316.

Yield strength at room temperature is nearly twice that of 304 and 316.

Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.

Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.

Related Specifications.

UNS

AMS

NACE

ASTM

ASME

Trade

S21800

5848

MR01-75

A240

A276

A479

SA240

SA193

AM 60

HPA 60

Typical Chemical Analysis

C

Cr

Fe

Mn

Ni

N

P

Si

S

.10

16-

18

59-

66

7.0-

9.0

8.0-

9.0

.08-

.18

.06

3.5-

4.5

.03

Typical Mechanical Properties

Tensile Strength

(UTS)

Yield Strength

.2 % offset.

Elongation

%

Hardness

(HB)

95-105 ksi

50 ksi min

35

100

Disclaimer

All data provided is for information and guidance only. Information above is not for design purposes and comes without warranty or guarantee with respect to the subject matter or fitness for purpose.